Custom cue sanding lathes @ Ted Harris Custom Cues

This site last updated 12/13/2007 12:12 AM

Shaft sanding lathe

Custom Cue work requires even the most rudimentary woodworking machinery. However, with just a few modifications for custom cue work these two standard wood lathes have proven to be among the most valuable machines here at Ted Harris Custom Cues. The lathe to the left is where all the shafts are sanded to match the butts, buffed and polished, then sealed and waxed before delivery.

The lathe to the right is used for sanding all butts to match up to the shafts. It is also where the wet sanding, buffing and polishing of all butts is done as well. After the cue has been wet sanded and polished, it will be wrapped with Irish Linen, leather, lizard or ring lizard here as well.

Lathe for wet sanding and polishing the butts

Continue Shop Tour

If you prefer to take the tour in no particular order, then use the links below...

Exterior

Pantograph

Main lathe

Taper/turning machine

Traveling repair station

Work bench & glue table

Milling machine

Spray booth

Table saw

Wood storage

Band saw & belt sander

Tool boxes and parts storage

Sanding lathes

Office & lounge

_________________________________________________

Telephone...305.677.3434
Business Hours;
Monday - Sunday
10:00am - 7:00pm

Ship all packages, repairs & correspondence to this address...
Please do not send joint protectors!!!
Ted Harris Custom Cues
808 South Dixie Highway
Hollywood, Florida 33020

These pages are best viewed with Microsoft Internet Explorer 4.0 or better, in 24 bit True Color, set to 800 x 600 pixels.