Cognoscenti pantograph @ Ted Harris Custom Cues

This site last updated 12/13/2007 12:12 AM

Here's the Scripta pantograph with a Haas digital indexer with a cue stick mounted in it for inlaying mounted right behind the template table. There is also a vacuum table that is used to hold down the inlay material for cutting into parts. In the bottom right hand corner is a little piece of the vacuum table, sitting on top of one of the dehumidifiers. Up until about 7 years ago, the pantograph and indexer were Joe Gold's of Cognoscenti Cues, and where used in the making of the cues

Scripta pantograph with Haas digital indexer

that were in the original "Hand of the Master's" Cuemaker calendar and for a short time thereafter. Shortly after the calendar came out, he stepped up to a super high end custom 4 axis CNC. Prior to Joe Gold/Cognoscenti era it was utilized by Gordy Hart, of Viking Pool Cues. On the wall behind the HAAS control box is a humidistat and thermometer. There are also three more humidistats around the shop to ensure that the readings are accurate.

Continue Shop Tour

If you prefer to take the tour in no particular order, then use the links below...

Exterior

Pantograph

Main lathe

Taper/turning machine

Traveling repair station

Work bench & glue table

Milling machine

Spray booth

Table saw

Wood storage

Band saw & belt sander

Tool boxes and parts storage

Sanding lathes

Office & lounge

_________________________________________________

Telephone...305.677.3434
Business Hours;
Monday - Sunday
10:00am - 7:00pm

Ship all packages, repairs & correspondence to this address...
Please do not send joint protectors!!!
Ted Harris Custom Cues
808 South Dixie Highway
Hollywood, Florida 33020

These pages are best viewed with Microsoft Internet Explorer 4.0 or better, in 24 bit True Color, set to 800 x 600 pixels.