All custom pool cues must have a finish applied.  This booth by Paasche was designed for just that.  It has an explosion proof motor, and 18" duct work that sucks out something like 2000cfm.  It also has a wood lathe that has been modified to variable speed for rotating the cues while the finish is being applied.  This is all done to give you a glass smooth, high gloss finish that will stand up to years of use.

The compressed air dryer removes all moisture from the air system.  This is yet another step taken to provide you with the best possible finish.  The finish used is a high gloss urethane automotive finish.  Each cue has at least 6 coats of finish applied before the final buffing stage.  After buffing, the finish is very high gloss and free from defects.

_________________________________________________

Telephone...754.246.6366
Business Hours;
Monday - Sunday
10:00am - 7:00pm
~Call for an appointment~

Ship all packages, repairs & correspondence to this address...
Please do not send joint protectors!!!
Ted Harris Custom Cues
808 South Dixie Highway
Hollywood, Florida  33020

| Welcome | About Us | Endorsements | Appearances | Cue Repair | Custom Cues | Order | Billiard News | Links

These pages are best viewed with Microsoft Internet Explorer 4.0 or better, in 24 bit True Color, set to 800 x 600 pixels.